Incorporated in 1993, China Yuqize Tools Co., Ltd. is located in the coastal scenic city of Ningbo. As one of the largest saw blade manufacturer and wholesaler in the power tools, air tools and pneumatic toolsindustry. We use CAD assistance system to design custom saw blades products, adopt America made 38-channel vacuum spectrometer for product components analysis, and use British measuring system and ultrasonic flaw detector for finished product test and inspection. All our cheap saw blade products are manufactured according to the standards ofGB/T15729-1995, GS, EMC, UL, CE and LCIE.

Saves 1/3 wood loss on each cut. Feeds easily when used for moderate rips and crosscuts on a table saw.
Reduces "JUMP IN" for better "PULL-CONTROL.". Eliminates bottom splintering on RADIAL CROSSCUTS.
With new 30° ATB tooth style this blade stops totally, ALL bottom and top splintering on ply veneers on both radial and table saw machines. With this all purpose blade for table saws you can rip and crosscut 1" 2" rockhards and softwoods resulting in a smooth as sanded surface. With 20° face hook, ply veneers will crosscut with no bottom splinter at moderate feed rates. Double hard and 40% stronger C4 carbide will give up to 300% longer life between sharpenings. Ends blade changing (one blade does rip, combo and crosscut), second-step finishing and cutting 1/16" oversize to allow for resurfacing. Buy and sharpen one blade instead of 3 (24T rip, 50T combination and 80T crosscut). Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made.

Features Freud's TiCo Hi-Density Carbide with Titanium for long life and a flawless finish. Unique side grind polishes the material to produce a superior finish. Laser cut anti-vibration slots reduces the vibration that resonates in standard blades extending the blade life. Tri-Metal Brazing for impact-resistant tips and precision tensioning keep the blades flat and true. Non-Stick Perma-Shield coating to resist heat and reduce pitch build-up. Use on table, radial arm or miter saws for crosscuts in soft and hardwood, fine moldings, orpicture frame molding 1/4" to 1-5/8" with a smooth-as-glass finish and minimal amount of side clearance; for thinner or thicker materials with some loss of surface finish. Tri-metal brazing absorbs shock. Expansion slots help control expansion from heat of operation without added noise. Laser cut and computer pretensioned for long life, smooth operation. Tungsten carbide with titanium resists chemicals/acids naturally present in wood and wood products. TCS self-lubricating coating reduces friction for long life and precise cuts; resists chemicals, pitch, resin and rust; cleans with hot water. Alternate top bevel, resharpenable teeth.